Sysadmin > GnS3 > Gns3Asa84onMac > FailedAsaGns3StartupOptions

Failed or only partly successfull configuration options for asa 8.4.2 on GNS3 on Mac

qemu-system-i386 -m 1024 -nographic -cpu coreduo -icount auto -hdachs 980,16,32 -kernel asa842-vmlinuz -initrd asa842-initrd.gz -append "ide_generic.probe_mask=0x01 ide_core.chs=0.0:980,16,32 auto nousb console=ttyS0,9600 bigphysarea=65536" -net nic
QEMU 1.2.0 monitor - type 'help' for more information
(qemu) QEMU 1.2.0 monitor - type 'help' for more information
(qemu) 
Warning: vlan 0 is not connected to host network
Initializing cgroup subsys cpu
Linux version 2.6.29.6 (builders@bld-releng-05a) (gcc version 4.3.4 (crosstool-NG-1.5.0) ) #1 PREEMPT Wed Jun 15 17:19:01 MDT 2011
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fffe000 (usable)
 BIOS-e820: 000000003fffe000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
last_pfn = 0x3fffe max_arch_pfn = 0x100000
RAMDISK: 3e985000 - 3ffef637
Allocated new RAMDISK: 003a1000 - 01a0b637
Move RAMDISK from 000000003e985000 - 000000003ffef636 to 003a1000 - 01a0b636
616MB HIGHMEM available.
407MB LOWMEM available.
  mapped low ram: 0 - 197fe000
  low ram: 00000000 - 197fe000
  bootmap 00001000 - 00004300
(7 early reservations) ==> bootmem [0000000000 - 00197fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000100000 - 000039ed10]    TEXT DATA BSS ==> [0000100000 - 000039ed10]
  #2 [000039f000 - 00003a1000]    INIT_PG_TABLE ==> [000039f000 - 00003a1000]
  #3 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #4 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
  #5 [00003a1000 - 0001a0b637]      NEW RAMDISK ==> [00003a1000 - 0001a0b637]
  #6 [0000001000 - 0000005000]          BOOTMAP ==> [0000001000 - 0000005000]
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x000197fe
  HighMem  0x000197fe -> 0x0003fffe
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0003fffe
Allocating PCI resources starting at 50000000 (gap: 40000000:bffc0000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259997
Kernel command line: ide_generic.probe_mask=0x01 ide_core.chs=0.0:980,16,32 auto nousb console=ttyS0,9600 bigphysarea=65536
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Fast TSC calibration using PIT
Detected 999.961 MHz processor.
Console: colour dummy device 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
allocated 5242840 bytes of page_cgroup
please try cgroup_disable=memory option if you don't want
Memory: 745612k/1048568k available (1715k kernel code, 301528k reserved, 623k data, 156k init, 630784k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffed000 - 0xfffff000   (  72 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xde000000 - 0xf77fe000   ( 407 MB)
      .init : 0xde34c000 - 0xde373000   ( 156 kB)
      .data : 0xde2acca6 - 0xde348938   ( 623 kB)
      .text : 0xde100000 - 0xde2acca6   (1715 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Calibrating delay loop (skipped), value calculated using timer frequency.. 1999.92 BogoMIPS (lpj=999961)
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Genuine Intel(R) CPU           T2600  @ 2.16GHz stepping 08
Checking 'hlt' instruction... 

qemu-system-i386 -cpu pentium2 -m 1024 -net nic,vlan=0 -net tap,id=vboxnet0,script=no -net nic,vlan=1 -net nic,vlan=2 -net nic,vlan=3 -net nic,vlan=4 -net nic,vlan=5 -kernel asa842-vmlinuz -append "ide_generic.probe_mask=0×01 ide_core.chs=0.0:980,16,32 console=ttyS0,9600n8 bigphysarea=65536 auto nousb ide1=noprobe no-hlt" -initrd asa842-initrd.gz -icount auto -nographic FLASH -serial telnet::4444,server -writeconfig working.cfg
qemu-system-i386: -net tap,id=vboxnet0,script=no: warning: could not open /dev/tap0 (No such file or directory): no virtual network emulation
qemu-system-i386: -net tap,id=vboxnet0,script=no: Device 'tap' could not be initialized

/usr/bin/qemu \
-L /usr/share/qemu \
-m 1024 \
-nographic \
-cpu coreduo \
-icount auto \
-hda FLASH \
-kernel asa842-vmlinuz \
-initrd asa842-initrd.gz \
-hdachs 980,16,32 \
-append "ide_generic.probe_mask=0x01 ide_core.chs=0.0:980,16,32 auto nousb console=ttyS0,9600 bigphysarea=65536" \
-net "nic,vlan=0,macaddr=00:00:ab:cd:ef:01,model=pcnet" -net "tap,vlan=0,script=no,ifname=tap0" \
-net "nic,vlan=1,macaddr=00:00:ab:cd:ef:02,model=pcnet" -net "user,vlan=1,net=172.16.1.0/24" \
-net "nic,vlan=2,macaddr=00:00:ab:cd:ef:03,model=pcnet" -net
"user,vlan=2,net=172.16.2.0/24" \
-net "nic,vlan=3,macaddr=00:00:ab:cd:ef:04,model=pcnet" -net "user,vlan=3,net=172.16.3.0/24"